Description
1.5 HP Variable Speed Swimming Pool Pump WiFi enabled, Modbus RS485
This is the SPV150WR. a 1.5HP variable speed swimming pool pump WiFi enabled. Designed for a range of applications this 1.5HP variable speed pump can be used in anything from swimming pools and spa pools to waterfalls and water features.
Energy Efficient
The main selling point of this variable speed pump is its energy efficiency. Normal single-speed pumps run at their maximum speed continuously. This can be highly inefficient due to the large energy consumption and results in a high running cost. In comparison, using this variable speed pool pump you can select one of three speeds to match your ideal flow rate. By optimizing the pump speed and water flow you reduce your energy consumption.
For example, the maximum power would only be used when vacuuming the pool. The lowest power setting can be used overnight or when the pool is not in use while the medium power setting can be used when the pool has been used during the day or in summer.
Programmable
This 1.5Hp variable speed pump also includes a scheduling function which can be found on the one-touch controller. It enables you to schedule the system with just the touch of a button. By setting up the timer you can set the system and not have to worry about needing to turn the pump on and off every day.
To conclude the Emaux SPV150 is a fantastic swimming pool pump WiFi enabled that will suit a variety of needs. It features a permanent magnet motor and is super quiet when running in the low RPM mode. This 1.5HP variable speed pool pump can be used with heating and with alternative sanitation methods such as salt chlorination or a UV system. It’s programmable and could even save you money in the long run. Be sure the check the product manual and leaflet for more technical information. If you are still unsure if this is the right pump for you do not hesitate to contact us.
Specification –
- 1.5 inch suction and discharge port with transparent lid
- Universal Union for 1.5″, 50mm ID. & 2″ OD. (63mm)
- Pre filter with removable basket
- Basket Volume 2 litres
- Permanent Magnet Motor (PMM)
- Class insulation 155(F)
- IPX5 Waterproof standard
- Built-in thermal protection
- Overload protection
- SS 316 Stainless Shaft & Mechanical Seal Components
- Graphite rotating seal face with SIC stationary face
- Single Phase – Standard 13A UK Plug
- Self-Priming up to 3m above water level
- Testing Pressure 50PSI (3.5 Bar)