Salt Chlorination SSC 25
- Titanium plates, maximum chlorine generation
- Production of 25 gram/hr
- Self-cleaning reverse polarity
- Water flow sensor
- Temperature sensor
- Connections: 50 mm / 1 ½” or 63 mm / 2″
- 2.5 bar
- Flow rate up to 25m/hr
- Maximum pool water volume 75m³
SSC 25 Salt Chlorinator is engineered for residential pools up to 75,000 liters.
Incorporating the latest technology in chlorine generation for domestic swimming pool the SSC range covers pool volumes up to 120m³.
Salt chlorination the simple cost effective means of chlorinated pools without the need for chemicals other than simple salt. Starting with clean tap water standard salt is introduced to around 4000 parts per million (4000 ppm). This concentration is around 10% of seawater values and around the concentration of a human tear drop, at this level just has a taste.
How it works:-
By the process of electrolysis and in the normal cycle of pool water being pumped and filtered the pool water with its salt load passes through an electrolytic cell which splits apart the salt (sodium chloride) into sodium and chlorine gas. The chlorine gas dissolves into the pool water to sanitize the pool. Over a few hours the sodium and gas recombine back into salt, gets split again as it passes the cell and the whole process begins again without additional salt being added.
Super efficient as the SS Mini does not require any additional pumping power, it uses the flow of water during the normal filtration times. Salt does not evaporate and the only loss is by the cleaning and backwash routine, splashing and wet bodies exiting the pool. This minimal loss can be compensated for by adding 4kg of salt per cubic meter of fresh water required in any top up.
Some additional plus points are reduced stingy eyes compared to chemical chlorine, salt is a much nicer product on the skin with greater ph balance.